The Dexstar Dual Wheel with 5-1/2" Offset # AM20790 does not have a maximum pressure since the wheel could handle far more than any tire that would fit. Max psi is determined by the valve stem. This wheel does not include a valve stem so you could add the # AM20906 which can handle up to 200 psi. view full answer...
The O-ring in the Replacement Spout Nut, O-Ring, and Snap Ring for Catalina Spouts # PF281026 is an AS 113 size.
The AS 113 size is a 9/16" inner diameter and 3/4" outer diameter. This will put the thickness of the O'ring at 3/32".
When I spoke to Phoenix the mentioned that it does fit onto the Catalina spout which has a 5/8" diameter. view full answer...
It is necessary to have a supplemental braking system installed in your towed vehicle. It is a law in most states in the USA and providences in Canada and if you are traveling through any of them you have to have one.
I recommend the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251 which is designed to work with RV's that have standard hydraulic brakes like your Sunseeker. This system is permanently installed and once set up will be easy to use. If you are planning on keeping... view full answer...
The Stromberg Carlson RV Exterior Ladder w/ Hinges, # LA-401BA is 99-1/2" tall x 12" wide. It will mount to the top of your RV and rise 7" above the roof. Please see the attached image. view full answer...
The distance between the lower mounting holes on the Curt Adjustable Width Trailer Hitch Receiver # 13703 is 10" but the higher ones are 7-1/2" apart on center. This uses 1/2" bolts so you should have 7" between where the bolt holes will be located on your trailer frame. view full answer...
For a Class C Motorhome storage cover you will measure the length, width, and height of the total motorhome; if the motorhome is in between sizes, select the larger cover. I have included a link to our selection of covers.
For example, the Adco SFS AquaShed RV Cover for Class C Motorhome, # 290-52845 has dimensions of 384" x 102" x 114" and fits vehicles up to 32' in length. Please note the graphic on the product page showing measurements. view full answer...
The base of the Ultra Faucets RV Bar Faucet part # 277-000069 measures 2" deep and the inlets are centered on the base so if you simply divide by two you can get the clearance from the center of the inlet to the back of the base which is 1". view full answer...
Go To Results